Effect of Noise Disturbances on the Response of Measuring Devices
الشريط الجانبي للمقالة
محتوى المقالة الرئيسي
الملخص
The present work studies the effect of noise on the dynamic response of pH, conductivity and thermocouple sensors which used into several industrial processes. Thermocouple would be proven had more stability against noise than conductivity and pH meter. The effect of noise on process signals could be condensate as low as possible by using suitable model of filter especially when the sensors were implemented to a digital computer.
المقاييس
تفاصيل المقالة
هذا العمل مرخص بموجب Creative Commons Attribution 4.0 International License.
THIS IS AN OPEN ACCESS ARTICLE UNDER THE CC BY LICENSE http://creativecommons.org/licenses/by/4.0/
##plugins.generic.plaudit.displayName##
المراجع
Thomson, S. J. and Safa M. A., “development of an automated high accuracy pH-measuring instrument with full and it reporting facility”, www.IEEEyplore.org, April, 1997. DOI: https://doi.org/10.1049/cp:19970116
Jim Cox and Dave Brown, “Noise of Eddy Current Instrumentation”, www.usace.army.mil, October, 2003.
Dobelin,E.O.”Measurement systems, Application and design”MacGraw- Hill,kogakusha,2nd edition,1975.
Smith, C. L., “Fundamentals of control theory”, Chemical Engineering. Desk book Issue, October, 15, 1979.
Stephanopouls, G., “Chemical process Control, An Introduction to theory and partice”, Prentic- Hall, New Jersey,2nd edition. (1984).
Jonson, D., “Process Control Instrumentation Technology”, Jhon Wiley, 3rd edition, (1988).
Zeebe, R. E. and Wolf G. D., “Co2 in Seawater Equilibrium Kinetic”, isotopic, Elsevier Science B. V., Amsterdam, Netherlands, (2001).