--->Manufacturing and minerals

11 Items

  • The Effect of Chain Tacticity on the Thermal Energy Parameters of Isotactic and Syndiotactic Polypropylene

    Baydaa J. Nabhan, Tawfeeq W. Mohammed, Harith H. Al-Moameri, Lubna Ghalib

    117-127

    DOI: https://doi.org/10.25130/tjes.31.2.11

  • Studying Heat-Affected Zone, Surface Roughness and Material Removal Rate in NPMEDM Process for Inconel 718 Using Nano Silicon Carbide Powder

    Dunia A. Ghulam, Abbas F. Ibrahim

    1-13

    DOI: https://doi.org/10.25130/tjes.32.1.11

  • Smart Polymer Composites Strain Sensors in Biomedicine: State-of-the-Art Material De-Sign and Applications

    Tabarak M.K. Al-Sharooi, Wessam Al Azzawi, Muzher Taha Mohamed

    1-19

    DOI: https://doi.org/10.25130/tjes.32.3.8

  • Preparation of Electrode Materials from Iron Cobalt Oxide on Carbon Fiber Cloth used for Asymmetric Supercapacitors

    Abeer A. Radhi, Sami I. Jafar Al-Rubaiey, Shaymaa Al-Rubaye

    1-9

    DOI: https://doi.org/10.25130/tjes.32.1.18

  • Experimental Investigations of a Springback in Hydromechanical Deep Drawing of Low Carbon Steel 1008 AISI

    Hibat Allah J. Hiseeb, Ali Abbar Khleif

    20-27

    DOI: https://doi.org/10.25130/tjes.31.2.3

  • Evaluation of Mechanical Properties of Al -7005/Red Mud and Phosphogypsum Hybrid Composites

    Waleed T. Rashid

    1-10

    DOI: https://doi.org/10.25130/tjes.32.3.16

  • Effect of Milling Process Variables on the Size of Hematite Ore Particles

    Zahraa K. Baqer, Mohammed H. Hafiz, Firas F. Sayyid

    135-145

    DOI: https://doi.org/10.25130/tjes.31.4.14

  • Effect of Liquid/Solid Volume Ratio on Interface Formation and Mechanical Properties of Aluminum – Copper Bimetal by Squeeze Casting

    Ali H. Jassim, Najeeb S. Abtaan, Saad R. Ahmed

    124-134

    DOI: https://doi.org/10.25130/tjes.31.4.13

  • EDM Electrode Design and Analysis to Enhance Process Performance

    Ahmed Mohammed Abbas, Ali Abbar Khleif

    145-152

    DOI: https://doi.org/10.25130/tjes.30.4.15

  • Characterizing the Mechanical Performance of Laser Welded Lap Transverse Fillet Joints of Thick AISI 316L Stainless Steel

    Raghad A. Al-Aloosi, Furat I. Hussein, Ahmed R. Alhamaoy, Muhannad A. Obeidi

    1-13

    DOI: https://doi.org/10.25130/tjes.32.3.17

  • A Statistical Investigation and Prediction of the Effect of FDM Variables on Flexural Stress of PLA Prints

    Khalida K. Mansor, Alaa H. Shabeeb, Emad A. Hussein, Tahseen F. Abbas, Aqeel S. Bedan

    10-17

    DOI: https://doi.org/10.25130/tjes.31.3.2