Mechanical Engineering

ASJC Code: 2210

Field: Mechanical Engineering

Subject Area: Physical Sciences

65 Items

  • Water Production from Atmospheric Air Using a Solar Water Recuperator by Glass Pyramid Device

    Hussein Hayder Mohammed Ali, Suad H. Danook, Khadija O. Mohiuddin

    1-12

    DOI: https://doi.org/10.25130/tjes.32.2.27

  • Thermal Loads and Cost Reduction for a Residential House by Change Its Orientation and Add Roof Shading

    Mahmood H. Khaleel

    13-30

    DOI: https://doi.org/10.25130/tjes.27.4.03%20

  • Theoretical and Experimental Analysis for Performance of Wind Turbine

    Suaad Hassan danok, Kamal Glal Twfek, Esraa Adel Mansour

    114-120

    DOI: https://doi.org/10.25130/tjes.27.4.12

  • The Performance Prediction of The Mixed Convection In an Inclined Circular Tube Filled Porous Media Based on an Intelligent Control

    Musa Mustafa Weis

    9-14

    DOI: https://doi.org/10.25130/tjes.26.2.02

  • The optimum conditions of Titanium Recovery process from the Iraqi Bauxite Ore

    Waleed T. Rashid, Baqer A. Ahmad, Ajheen H. Jumaah

    7-14

    DOI: https://doi.org/10.25130/tjes.29.2.2

  • The Influence of Angled Electrodes on Various Characteristics in EDM Process - Review Article

    Ahmed Abbas, Ali Abbar Khleif

    1-9

    DOI: https://doi.org/10.25130/tjes.30.2.1

  • The Impact of Receiver Geometry with Nanofluid on the Performance of a Fresnel Collector

    Manar S. M. Al-Jethelah, Hussam S. Dheyab, Samer M. Khalaf, Khairul Habib, Kamaruzzaman Bin Sopian

    1-11

    DOI: https://doi.org/10.25130/tjes.32.1.19

  • The Effect of Uneven Metal Foam Distribution on Solar Compound Parabolic Trough Collector Receiver Thermal Performance

    Israa S. Farhan, Akeel A. Mohammed, Manar S. M. Al-Jethelah

    291-305

    DOI: https://doi.org/10.25130/tjes.31.1.24

  • The Effect of Thermal Radiation and Variable Viscosity Parameters on a Fluid Flow Down Along an Inclined Plane With Free Surface

    Mustapha M.A. Usman, Sefiu S.A. Onitilo, Titilope S.T. Moshood

    12-24

    DOI: https://doi.org/10.25130/tjes.27.1.03

  • The Effect of Exterior Wall Color on Thermal Performance of Building

    Hassan Kareem Abdullah, Rana Qassim Faraj

    15-23

    DOI: https://doi.org/10.25130/tjes.29.3.2

  • The Effect of Dry and Wet Bulb Temperature Variation on the Performance of the Indirect Evaporative Cooler

    Maki Haj Zaidan, Fayadh Mohamed Abed, Ali Sinjar Farhad

    8-15

    DOI: https://doi.org/10.25130/tjes.26.4.02

  • The Effect of Chain Tacticity on the Thermal Energy Parameters of Isotactic and Syndiotactic Polypropylene

    Baydaa J. Nabhan, Tawfeeq W. Mohammed, Harith H. Al-Moameri, Lubna Ghalib

    117-127

    DOI: https://doi.org/10.25130/tjes.31.2.11

  • Studying Heat-Affected Zone, Surface Roughness and Material Removal Rate in NPMEDM Process for Inconel 718 Using Nano Silicon Carbide Powder

    Dunia A. Ghulam, Abbas F. Ibrahim

    1-13

    DOI: https://doi.org/10.25130/tjes.32.1.11

  • Study the Thermal Performance of a PCM Layer-Filled Triple Glazed Window under Iraqi Climate Conditions

    Mina A. Nsaif, Jalal M. Jalil, Mounir Baccar

    246-257

    DOI: https://doi.org/10.25130/tjes.31.3.23

  • Study the Mechanical Properties and Fatigue Effect of Multilayer Woven E-Glass/Epoxy Composite under Constant and Variable Loading

    Saif-Aldeen Ghafel, Nasri Salih M. Namer , Abduljabar H. Ali

    21-30

    DOI: https://doi.org/10.25130/tjes.30.2.3

  • Study the effect of welding pass number on the mechanical and metallurgical properties of Aluminum type Al 1050 H14 produced by friction stir welding

    Najeeb Salman Abtan, Jawdat Ali Yagoob, Ayshan Mohammed Shukri

    1-13

    DOI: https://doi.org/10.25130/tjes.28.4.01

  • Study the Effect of Granules Type of The Porous Medium on The Heat Transfer Enhancement for Double Pipe Heat Exchanger

    Ehsan F. Abbas, Shagul S. Mohammed

    43-49

    DOI: https://doi.org/10.25130/tjes.26.4.07

  • Simulation And Analysis of An Intelligent Power System Stabilizer Using Fuzzy Logic

    Firas Ahmed Majeed AlDurze, Sura Amer Abdullah

    70-86

    DOI: https://doi.org/10.25130/tjes.27.4.08

  • Preparation of Electrode Materials from Iron Cobalt Oxide on Carbon Fiber Cloth used for Asymmetric Supercapacitors

    Abeer A. Radhi, Sami I. Jafar Al-Rubaiey, Shaymaa Al-Rubaye

    1-9

    DOI: https://doi.org/10.25130/tjes.32.1.18

  • Performance Augmentation of Household Batch Digester using a Circular Horizontal Extended Surface

    Ammar H. Soheel, Johain J. Faraj, Fawziea M. Hussein

    1-11

    DOI: https://doi.org/10.25130/tjes.31.4.1

  • Optimization of Machining Parameters of AISI 1045 Steel for Better Surface Finish and Tool Life Using TiN Coated Carbide Insert

    Lujain H. Kashkool

    1-6

    DOI: https://doi.org/10.25130/tjes.29.2.1

  • Numerical Study of Tube Hydroforming Process Using Conical Dies

    Tahseen T. Othman Al-Qahwaji, Ahmad Ameen Hussain

    25-36

    DOI: https://doi.org/10.25130/tjes.28.4.3
  • Article Cover Page

    Metallic Oxides for Innovative Refrigerant Thermo-Physical Properties: Mathematical Models

    Khairul Habib, Mohammed Ahmed, Ahmed Qays Abdullah, Omer A. Alawi, Balaji Bakthavatchalam, Omar A. Hussein

    1-15

    DOI: https://doi.org/10.25130/tjes.29.1.1

  • Measurements of Vibration and Noise Level at Different Cement Companies

    Sabah. J. Mohammed Ali, Hiba. H. Alwan

    15-21

    DOI: https://doi.org/10.25130/tjes.27.2.02

  • Investigation of Corrosion Resistance and Surface Properties of Carbon Steel Treated with Phosphate Coating in Aqueous Media

    Hazim B. Hasan, Mohammed S. Ahmed

    1-10

    DOI: https://doi.org/10.25130/tjes.32.1.2

  • Insulation Materials Based on Recycled Feather Waste: A Review

    Abdulmunem R. Abdulmunem Alsamaraie, Pakharuddin Mohd Samin, Izhari Izmi Mazali, Abdullateef A. Jadallah, Khalid F. Sultan

    104-111

    DOI: https://doi.org/10.25130/tjes.30.1.10

  • Influences of Mg Addition on the Mechanical Properties of Cu-Al-Ni Shape Memory Alloys

    Raed N. Razooqi, Omar J. Abdulkareem

    82-93

    DOI: https://doi.org/10.25130/tjes.27.3.10

  • Influence of the Yttria and Graphite Particles on the same of Al 2024 Alloy Properties

    Raed N. Razooqi, Ahmed A. Akbar, Mohanad L. Hamada

    1-7

    DOI: https://doi.org/10.25130/tjes.26.4.01

  • Influence of Stress Cycles under the Fatigue Endurance Limit on Strength and Life of Aluminum Nanocomposite

    Aseel A. Alhamdany, Thaer Abdulwahhab Shihab, Adil Abed Nayeeif, Hussain Jasim Alalkawi

    1-9

    DOI: https://doi.org/10.25130/tjes.32.2.10

  • The Improving the Thermal Performance of a Heat Exchanger using a New Passive Technology

    Manar Hameed, Harith N. Mohammed, Mohammed R. Abdullah

    66-71

    DOI: https://doi.org/10.25130/tjes.30.1.6

  • Improving the Performance of a Home Solar Water Heater System Using Porous Materials and Reflectors

    Hind F. Saleh, Muhammad Asmail Eleiwi, Nassir D. Mokhlif

    244-254

    DOI: https://doi.org/10.25130/tjes.31.2.23

  • Improving mechanical properties of laminated biocomposites for artificial lower limb socket

    Adel Mahmood Bash, Tahseen T. Othman, Jawad K. Oleiwi

    9-16

    DOI: https://doi.org/10.25130/tjes.30.3.2

  • Friction Stir Spot Welding between Copper and AA6061-T6 with the Aid of Interlayer: An Experimental Study

    Kareem A. Falih, Isam J. Ibrahim, Sabah K. Hussein

    1-13

    DOI: https://doi.org/10.25130/tjes.32.1.8

  • Fatigue Life Prediction for an Extrusion Die Based on the Experimental Factors

    Vivean Hassan Hammed, Mohammed Ali Nasser, Ali Hassan Salih

    1-15

    DOI: https://doi.org/10.25130/tjes.32.1.31

  • Fatigue Life Estimation under High Temperature and Variable Loading of AA7001-T6 Using Shot Peening

    Asaad Khudhair Hamzah, Raad M. Abed, Abdulwahab M. AL-Mushehdany, Hussain Jasim M. Alalkawi

    168-174

    DOI: https://doi.org/10.25130/tjes.31.2.16

  • Experimental Study of Single-Lap Adhesive Joints to Analyze and Predict the Tensile Strength Values of Aluminum Alloy 6061 Substrates using Artificial Neural Networks

    Abass Enzi, Omar Hashim Hassoon, Osama H. Hussein, Lujain H. Kashkool

    117-123

    DOI: https://doi.org/10.25130/tjes.31.4.12

  • Experimental Investigations of a Springback in Hydromechanical Deep Drawing of Low Carbon Steel 1008 AISI

    Hibat Allah J. Hiseeb, Ali Abbar Khleif

    20-27

    DOI: https://doi.org/10.25130/tjes.31.2.3

  • Experimental Investigation on the Fatigue Behavior on Honeycomb Sandwich Composite Panels

    Ahmed Ali Khalid , Fadhel Abbas Abdulla , Mushtaq Al-Sharify

    122-129

    DOI: https://doi.org/10.25130/tjes.30.2.13

  • Experimental Investigation of Process Parameters in the Hydrostatic Forming to Enhance a Square Steel Cup Formability

    Adil Sh. Jaber, Adnan I. Mohammed, Karem M. Younis

    1-13

    DOI: https://doi.org/10.25130/tjes.32.2.1

  • Experimental Characterization of Glass/ Carbon Hybrid Composite Reinforced by SiO2 Nanoparticles

    Thaker S. Dawood, Basim M. Fadhil, Dlair O. Ramadan

    1-11

    DOI: https://doi.org/10.25130/tjes.32.2.28

  • Experimental and Numerical Study on the Effect of Strain Hardening Characteristics on Curved Flaring Process of Pure Copper and Brass

    Tahseen T.O Al-Qahwaji, Yasir A.A Al-Jobory

    39-47

    DOI: https://doi.org/10.25130/tjes.27.4.05r

  • Energy And Exergy Assessment of North Refineries Company (NRC) Steam Cycle Based on Air Mass Flowrate of Main Condenser

    Waad A. Salih, Aadel A. Alkumait, Hameed J. Khalaf

    61-70

    DOI: https://doi.org/10.25130/tjes.28.3.05

  • Energy and Exergy Analyses of a Combined Power Plant Based on Natural Gas Combustion

    Khalaf Ibrahim Hamada, Marwah N Mohammed, Raad R. Jasim , Thamir K. Ibrahim

    17-26

    DOI: https://doi.org/10.25130/tjes.30.3.3
  • Artcile 2 in No.1 Vol28

    Effects of Surface Preparation on the Corrosion Behavior of Mild Steel

    Wasiu Ayoola, Stephen Durowaye, Kenneth Andem, Olujide Oyerinde, Jesutofunmi Ojakoya

    16-25

    DOI: https://doi.org/10.25130/tjes.29.1.2

  • Effect of Yttrium Oxide on Mechanical and Physical Properties of Fe–10%Cu Composite

    Farouk M. Mahdi, Omar H. Mahmood

    67-72

    DOI: https://doi.org/10.25130/tjes.27.3.08

  • Effect of the Gyroscopic Moment, Centrifugal Force and Hydroplaning on the Critical Speed of the Vehicle

    Ibrahem A. Muhsin, Abdalrahman M. Shwikh

    39-48

    DOI: https://doi.org/10.25130/tjes.26.2.06

  • Effect of Steel shot peening Time on some Mechanical Properties of Friction stir Welds for Aluminum Alloy (2024 - T3)

    Adel Mahmoud Al-Bash , Ghazwan Raad Shihab

    58-69

    DOI: https://doi.org/10.25130/tjes.27.4.07

  • Effect of Random Vibration of Rotor Supports with Nano Additives Lubricants

    Marwan Abdulrazzaq Salman, Mahmud R. Ismail

    1-15

    DOI: https://doi.org/10.25130/tjes.32.2.23

  • Effect of Phase Change Material Heated by Solar Energy on the Flow Assurance of Heavy Crude Oil

    Ghassan Al-Doori, Osama H. Al Naamani, Girma T. Chala

    1-12

    DOI: https://doi.org/10.25130/tjes.32.2.18

  • Effect of Milling Process Variables on the Size of Hematite Ore Particles

    Zahraa K. Baqer, Mohammed H. Hafiz, Firas F. Sayyid

    135-145

    DOI: https://doi.org/10.25130/tjes.31.4.14