URN: http://nbn-resolving.iq/urn:nbn:iq:1025-tjes.v33i10

Published: 2026-04-28

Articles

The Thermophysical Properties of Various Types of Evaporative Cooling Pads Materials

Zeyad Khalaf Hamad, Thamer Khalif Salem, Manar S.M. Al-Jethelah

1-10

PDF
DOI: https://doi.org/10.25130/tjes.33.1.7

Estimation of Surface Runoff in Erbil Basin Using WMS

Jwan S. Mustafa, Dana K. Mawlood

1-16

PDF
DOI: https://doi.org/10.25130/tjes.33.1.6

Numerical Exploration and Optimisation on Pullout Capacity Behaviour for Under-Reamed Piles in Dry and Partially Saturated Sand

Anji W. Al-Bayati, Mohammed A. Al-Neami, Falah H. Rahil

1-13

PDF
DOI: https://doi.org/10.25130/tjes.33.1.2

Performance of Reinforced Concrete Beams Composed of Recycled Concrete with Varying Compressive Strengths Under the Effect of Repeated Shear Loads

Abdulla Saeb Tais

1-17

PDF
DOI: https://doi.org/10.25130/tjes.33.1.18

Evaluate the Effect of a High-k Gate Dielectric on MOSFET Performance Using Silvaco TCAD Simulation

Yathrib Waleed Qasim, Qais Th Algwari

1-12

PDF
DOI: https://doi.org/10.25130/tjes.33.1.15

Surface Response Optimization for Absorption of CO2 Bubbles in Sweetener Solution by the Gas-Liquid Mass Transfer Operation

Ahmed Dheyaa Nsaif, Ibtehal Kareem Shakir

1-17

PDF
DOI: https://doi.org/10.25130/tjes.33.1.10

Removal of Methylene Blue Dye from Wastewater Using a Local Iraqi Natural Plant Polypogon Monspeliensis

Hind A. Ahmed, Hiba B. Deab, Alaa E. Sultan, Peter Oladoye, Hawraa R. Bohan, Mohammed Kadhom

1-16

PDF
DOI: https://doi.org/10.25130/tjes.33.1.24

Numerical Investigation of the Effect of Post Notching Size and Location on the Behavior of Reinforced Concrete Beam before and after Strengthening

Harith Al-Salman, Hassanin Abd Ali Alfatlawy, Zainb Kareem Al-Mamory, Hayder Abdulwahid Khalaf, Fuad Abutaha

1-17

PDF
DOI: https://doi.org/10.25130/tjes.33.1.12

Speed and Current Using Fuzzy Controllers of PMSM under Field-Weakening

Layth Fadhil Abbas, Luma A. Almajeed, Nihad M. Ameen, Riemann Essa Ahmed, Arkan Ahmed Hussein, Yushaizad Yusof, Muhammad Ammirrul Atiqi Mohd Zainuri

1-11

PDF
DOI: https://doi.org/10.25130/tjes.33.1.17

Investigation of Carbon Emission from Construction Waste in the Building Construction Process

Gzing Adil Mohammed, Farah Subhi Hayder, Shuokr Qarani Aziz, Dilshad K. Jaf

1-8

PDF
DOI: https://doi.org/10.25130/tjes.33.1.16

Groundwater Steady Flow Simulation in the Confined Aquifer of the Lower Zab River Basin, Iraq

Mohammed Jallel AL Janabi, Ruqayah Kadhim Mohammed

1-13

PDF
DOI: https://doi.org/10.25130/tjes.33.1.3

Study of Using Virtual Reality Technology to Simulate the Generation of Electrical Power from Different Sources

Aous Naji Rasheed, Ruya Jaafar Aliagha, Luma A. Almajeed, Tanveer Saleh, Binod Kumar Pattanayak

1-9

PDF
DOI: https://doi.org/10.25130/tjes.33.1.8

Enhanced Dye Removal Rate from Textile Wastewater Using Advanced Oxidation: A Case Study of Jeans and Wool Dying Factories in Hama City

Fatma S. Alloush, Mohammad A. Hillal

1-14

PDF
DOI: https://doi.org/10.25130/tjes.33.1.27

Optimal Controllers Design for Position Control of DC Servo Motor Under Disturbance

Kareem A. Al-badri, Rawaa R. Al-majeez

1-9

PDF
DOI: https://doi.org/10.25130/tjes.33.1.20

Experimental Assessment of the Performance of the Snake Robot

Hawazen N. Shubat, Ali H. Mohammed, Omer K. Ahmed

1-12

PDF
DOI: https://doi.org/10.25130/tjes.33.1.23

Greenhouse Gas Emissions Potential from Municipal Solid Waste Disposal Sites

Hamid A. Al-Khashab, Anas F. Qassid, Layth A. Mahmood, Alen Gusa

1-13

PDF
DOI: https://doi.org/10.25130/tjes.33.1.4

Improving the Dynamic Performance of Hybrid Storage Systems Provided by PV Solar Panels

Mohammed Albaker Najm Abed, Ali Abdul Razzaq Altahir, Ahmed Abdulhadi Al-Moadhen

1-14

PDF
DOI: https://doi.org/10.25130/tjes.33.1.22

Soft Computing-Based Model for the Ultimate Strength Prediction of Concrete-Filled Circular-Steel Columns

Suha Rasheed Abbas, Ammar N. Hanoon, Ali A. Abdulhameed, Mahir M. Hason, Haitham Jameel Abd

1-16

PDF
DOI: https://doi.org/10.25130/tjes.33.1.25

Use of ZSM-5 Photocatalyst for the Removal of Nickel and Cadmium Cations in Batch Experiment

Amal J. M. Al-Hamadani, Hayder Akram Al-Naseri, Ahmed A. Al-Mamoori, Nalan Turkoz Karakullukcu

1-14

PDF
DOI: https://doi.org/10.25130/tjes.33.1.28

Digital Modeling for Selecting the Optimal Combination of Building and Thermal Insulation Materials

Ihsan A. Hussein Al-Sarray, Maysoon A. Mansor, Leonid B. Zelentsov, Ahmed A. Naji

1-8

PDF
DOI: https://doi.org/10.25130/tjes.33.1.21

Assessment of Mechanical Performance of Fiber Reinforced Geopolymer Concrete at Different Curing Conditions

Alaa Y. Hussein, Hammad M. Abd, Hasan M. Ahmed Albegmprli

1-13

PDF
DOI: https://doi.org/10.25130/tjes.33.1.13

Evaluating the Performance and Emissions of a Diesel Engine Blended with Cottonseed

Mugdad Hamid Rajab, Maysoon Anwar Abdullah

1-10

PDF
DOI: https://doi.org/10.25130/tjes.33.1.30

Review Article

Review of the Behavior of Geogrid-Reinforced Sand Soil Supported a Shallow Footing under Different Loadings

Ruqayah Al-Khafaji, Qassun S. Mohammed Shafiqu

1-23

PDF
DOI: https://doi.org/10.25130/tjes.33.1.9

A Review on Lanthanum-Nickel-Based    Perovskite Catalysts for Catalytic Dry Reforming of Methane

Halah A. Ramadhan, Maha Al-Ali

1-42

PDF
DOI: https://doi.org/10.25130/tjes.33.1.5

A Review Study of the Dynamic Load Effect on the Behavior of Shallow Footing Resting on Geogrid-Reinforced Soil

Naser Abed Hasen, Jawdat K. Abbas, Mohammed Mutnbak, Nimer Alselami

1-12

PDF
DOI: https://doi.org/10.25130/tjes.33.1.1

Role of the Single Sheet Pile Beneath the Dams on Seepage Parameters Maintenance: Review

Omed Mohammed Pirot, Rashad Mohammed Hassan, Mohammed Nadhim Qadir, Mahmoud Abdelsalam Aref Obeid, Aurangzaib Abdul Samad Sanwal Khan

1-13

PDF
DOI: https://doi.org/10.25130/tjes.33.1.31

Influence of Fiber Fillers on The Ballistic Properties of Epoxy and Polyester Resins: A Review

Mohanad L. Hamada, Saad R. Ahmed, Sanjeev Khanna, Mohammed Mutanbak

1-11

PDF
DOI: https://doi.org/10.25130/tjes.33.1.11

Special Issue

Sustainable and Recycled Materials Additives for Tire Rubber Manufacturing: A Review

Hiba Abdali Jasim, Jumaa S. Chiad

1-17

PDF
DOI: https://doi.org/10.25130/tjes.33.1.26