Mechanical Engineering

ASJC Code: 2210

Field: Mechanical Engineering

Subject Area: Physical Sciences

65 Items

  • Effect of Liquid/Solid Volume Ratio on Interface Formation and Mechanical Properties of Aluminum – Copper Bimetal by Squeeze Casting

    Ali H. Jassim, Najeeb S. Abtaan, Saad R. Ahmed

    124-134

    DOI: https://doi.org/10.25130/tjes.31.4.13

  • Effect of Different Compressor Speeds on the Energy and Exergy of an Automobile Air-Conditioner Using R134a in the Absence and Presence of a Liquid-Suction Heat Exchanger

    Ansam A. M. Alani, Wail S. Sarsam

    1-15

    DOI: https://doi.org/10.25130/tjes.32.1.13

  • Effect of Adding Nano Ag on Mechanical and Physical Properties of Cu–10% Fe Prepared by Powder Metallurgy Technique

    Farouk M. Mahdi, Omar H. Mahmood

    13-20

    DOI: https://doi.org/10.25130/tjes.28.1.02

  • EDM Electrode Design and Analysis to Enhance Process Performance

    Ahmed Mohammed Abbas, Ali Abbar Khleif

    145-152

    DOI: https://doi.org/10.25130/tjes.30.4.15

  • Design, Fabrication, and Experimental Analysis of a PV Panel for a Smart Sunflower System

    Hayder A. Alnaieli, Abdullateef A. Jadallah, Ali H. Numan

    113-126

    DOI: https://doi.org/10.25130/tjes.31.1.10

  • Design of an Axisymmetric Triangular Heatsink with Radial Arrangement: An Experimental Investigation of Natural Convection Heat Transfer

    Jamal Bakr Khaleel, Merdin Danışmaz, Tahseen Ahmad Tahseen, Mohammed I. A. Tahseen, Thamer Khalif Salem

    92-101

    DOI: https://doi.org/10.25130/tjes.31.4.9

  • Crude Oil Desalting Using Multi-Surfactant Based on a Best Dosage, Solvent and Mixing Ratio

    Ali Hussein Khalaf, Mohammed Salah Rajab

    23-27

    DOI: https://doi.org/10.25130/tjes.26.2.04

  • Closed Solar Air Heater System Integrated with PCM (RT42 and RT50) in a Thermal Storage-Finned Heat Exchanger Unit

    Hussam S. Dheyab, Manar Al-Jethelah, Thamir K. Ibrahim, Sirine Chtourou, Mounir Baccar

    27-37

    DOI: https://doi.org/10.25130/tjes.30.3.4

  • Assessment of Perforated Double-Pass Solar Air Heater Using Parametric Interaction Analysis for Performance Enhancement in Solar Thermal Systems

    Ali A. Gitan, Abdulbari Mohammed

    177-191

    DOI: https://doi.org/10.25130/tjes.31.3.17

  • An Experimental Investigation on Heat Transfer Enhancement in An Annulus with Rotating Outer Cylinder Using Nano Fluids

    Samer Mahmood Khalaf, Akeel Abdullah Mohammed, Qasim Jabbar Mohammed

    51-60

    DOI: https://doi.org/10.25130/tjes.29.2.7

  • An Experimental and Numerical Investigation of the Effect of Different Wall Types on the Iraqi Building's Thermal Load

    Atif Ali Hasan, Mahmood H. Khaleel , Kadhum Audaa Jehhef

    223-235

    DOI: https://doi.org/10.25130/tjes.31.1.19

  • An Automatic Drawing Spur Gears Based on AutoCAD Program

    Najat Najmaldeen Hamed

    64-70

    DOI: https://doi.org/10.25130/tjes.28.1.07

  • A Theoretical Study to Incorporate Capillary Tubes Action and Evaporation Process as Green Energy Techniques for Water Lifting

    Tawfeeq W. Mohammed, Marwah N. Mohammed, Muhammad A. Eleiwi, Thamir K. Ibrahim

    159-166

    DOI: https://doi.org/10.25130/tjes.30.4.17

  • A Statistical Investigation and Prediction of the Effect of FDM Variables on Flexural Stress of PLA Prints

    Khalida K. Mansor, Alaa H. Shabeeb, Emad A. Hussein, Tahseen F. Abbas, Aqeel S. Bedan

    10-17

    DOI: https://doi.org/10.25130/tjes.31.3.2

  • A Comparison of Tensile and Flexural Properties of Jute Mat Epoxy-Based Composites Treated with Different Alkaline Solutions

    Aseel M. Abdullah

    1-9

    DOI: https://doi.org/10.25130/tjes.32.1.6