Modeling and Simulation Control of Buck Converter Applied to Solar Energy

Main Article Content

Azahar S. Abdulfatah
Esraa K. Sae’d

Abstract

The great difficulty in controlling the value of the continuous voltage and the inability to use electrical transformers because of constant produce flux by the direct current(DC) with time, therefore must be find other ways to control the continuous voltage value. The best methods used for this purpose are power electronics circuit, these circuits is buck converter, as a result of the output voltage becomes lower than from the input voltage. the renewable energies need to converter circuits to enable consumers to use and the circuit which represent the heart of the hybrid system (the sun /wind).
This research addresses use modern methods in the control of buck converter used with the hybrid systems (solar energy / wind) as well as mathematically represented using the equations and computer simulation program and the famous (proteas (ISIS professional)) .

Metrics

Metrics Loading ...

Article Details

Section
Articles

Plaudit

References

- Timothy, D. Green, "System Programming with the PIC 16F877", Cleveland, Ohio, 2008.

- Mohammad, H. Rashid, "Power Electronics Circuit", Devices ,and Application,3rd,Academic press, New York, 2004.

- Eftichios, L. Koutroulis, Kostas, M. Kalaitzakis., and Nicholas, C. Voulgaris, "Development of a Microcontroller Based Photovoltc Maximum Power Point Tracking Control System", IEEE Transaction on Power Electronics, Vol.16, No-1, 2001. DOI: https://doi.org/10.1109/63.903988

- Pcmb, M. Bernardo, Assiszmp, M. Peixoto and Lauro, B. Machado Neto, "A High Efficient Micro-controlled Buck Converter with Maximum Power Point Tracking for Photovoltaic Systems", International Conference on Renewable Energies and Power Quality, Valencia, 2009. . DOI: https://doi.org/10.24084/repqj07.502

- Sudharshan, R. Kaarthik, Nayan K. Dalei, Vigneshwara, R. Rabinarayan Das, "Modeling Simulation and Implementation of Low Power Photovoltaic Energy Conversion System", Thesis, India, Rourkela, 2010.

- Ahmad, M. Aday, "Control on the Speed of Machine", M.Sc. Thesis Mosul University, 2012.

- Mehdi, N. Dali, Jamel, P. Belhadj and Xavier, Z. Roboam, "Design of Stand-Alone Hybrid Photovoltaic Wind System with Battery Storage", Regular Paper, 2009.

- Bengt, D. Johansson, 'DC-DC Converters-Dynamic Model Design and Experi- Mental, Verification. M.Sc. Thesis, Lund, University, 2004.

- Intelligent Schematic Input System User Manual, Issue 6.3 November, 2003.

Similar Articles

You may also start an advanced similarity search for this article.