URN: http://nbn-resolving.iq/urn:nbn:iq:1025-tjes.v33i10

منشور: 2026-04-28

Articles

The Thermophysical Properties of Various Types of Evaporative Cooling Pads Materials

Zeyad Khalaf Hamad، Thamer Khalif Salem، Manar S.M. Al-Jethelah

1-10

PDF (الإنجليزية)
DOI: https://doi.org/10.25130/tjes.33.1.7

Estimation of Surface Runoff in Erbil Basin Using WMS

Jwan S. Mustafa، Dana K. Mawlood

1-16

PDF (الإنجليزية)
DOI: https://doi.org/10.25130/tjes.33.1.6

Numerical Exploration and Optimisation on Pullout Capacity Behaviour for Under-Reamed Piles in Dry and Partially Saturated Sand

Anji W. Al-Bayati، Mohammed A. Al-Neami، Falah H. Rahil

1-13

PDF (الإنجليزية)
DOI: https://doi.org/10.25130/tjes.33.1.2

Performance of Reinforced Concrete Beams Composed of Recycled Concrete with Varying Compressive Strengths Under the Effect of Repeated Shear Loads

Abdulla Saeb Tais

1-17

PDF (الإنجليزية)
DOI: https://doi.org/10.25130/tjes.33.1.18

Enhancing High-Density Polyethylene with Yellow Oil Fly Ash: Mechanical, Physical, and Tribological Behavior Analysis

Saif S. Irhayyim، Farouk M. Mahdi، Saad R. Ahmed، Sanjeev Khanna، Mohammed Mutanbak

1-28

PDF (الإنجليزية)
DOI: https://doi.org/10.25130/tjes.33.1.14

Evaluate the Effect of a High-k Gate Dielectric on MOSFET Performance Using Silvaco TCAD Simulation

Yathrib Waleed Qasim، Qais Th Algwari

1-12

PDF (الإنجليزية)
DOI: https://doi.org/10.25130/tjes.33.1.15

Surface Response Optimization for Absorption of CO2 Bubbles in Sweetener Solution by the Gas-Liquid Mass Transfer Operation

Ahmed Dheyaa Nsaif، Ibtehal Kareem Shakir

1-17

PDF (الإنجليزية)
DOI: https://doi.org/10.25130/tjes.33.1.10

Removal of Methylene Blue Dye from Wastewater Using a Local Iraqi Natural Plant Polypogon Monspeliensis

Hind A. Ahmed، Hiba B. Deab، Alaa E. Sultan، Peter Oladoye، Hawraa R. Bohan، Mohammed Kadhom

1-16

PDF (الإنجليزية)
DOI: https://doi.org/10.25130/tjes.33.1.24

Numerical Investigation of the Effect of Post Notching Size and Location on the Behavior of Reinforced Concrete Beam before and after Strengthening

Harith Al-Salman، Hassanin Abd Ali Alfatlawy، Zainb Kareem Al-Mamory، Hayder Abdulwahid Khalaf، Fuad Abutaha

1-17

PDF (الإنجليزية)
DOI: https://doi.org/10.25130/tjes.33.1.12

Speed and Current Using Fuzzy Controllers of PMSM under Field-Weakening

Layth Fadhil Abbas، Luma A. Almajeed، Nihad M. Ameen، Riemann Essa Ahmed، Arkan Ahmed Hussein، Yushaizad Yusof، Muhammad Ammirrul Atiqi Mohd Zainuri

1-11

PDF (الإنجليزية)
DOI: https://doi.org/10.25130/tjes.33.1.17

Investigation of Carbon Emission from Construction Waste in the Building Construction Process

Gzing Adil Mohammed، Farah Subhi Hayder، Shuokr Qarani Aziz، Dilshad K. Jaf

1-8

PDF (الإنجليزية)
DOI: https://doi.org/10.25130/tjes.33.1.16

Groundwater Steady Flow Simulation in the Confined Aquifer of the Lower Zab River Basin, Iraq

Mohammed Jallel AL Janabi، Ruqayah Kadhim Mohammed

1-13

PDF (الإنجليزية)
DOI: https://doi.org/10.25130/tjes.33.1.3

Study of Using Virtual Reality Technology to Simulate the Generation of Electrical Power from Different Sources

Aous Naji Rasheed، Ruya Jaafar Aliagha، Luma A. Almajeed، Tanveer Saleh، Binod Kumar Pattanayak

1-9

PDF (الإنجليزية)
DOI: https://doi.org/10.25130/tjes.33.1.8

Enhanced Dye Removal Rate from Textile Wastewater Using Advanced Oxidation: A Case Study of Jeans and Wool Dying Factories in Hama City

Fatma S. Alloush، Mohammad A. Hillal

1-14

PDF (الإنجليزية)
DOI: https://doi.org/10.25130/tjes.33.1.27

Optimal Controllers Design for Position Control of DC Servo Motor Under Disturbance

Kareem A. Al-badri، Rawaa R. Al-majeez

1-9

PDF (الإنجليزية)
DOI: https://doi.org/10.25130/tjes.33.1.20

Experimental Assessment of the Performance of the Snake Robot

Hawazen N. Shubat، Ali H. Mohammed، Omer K. Ahmed

1-12

PDF (الإنجليزية)
DOI: https://doi.org/10.25130/tjes.33.1.23

Miniaturized and Low SAR Printed Antenna for Healthcare Monitoring

Abu Obaydah N. Khazaal، Mohammed K. S. Al-Mashhadani

1-10

PDF (الإنجليزية)
DOI: https://doi.org/10.25130/tjes.33.1.35

Greenhouse Gas Emissions Potential from Municipal Solid Waste Disposal Sites

Hamid A. Al-Khashab، Anas F. Qassid، Layth A. Mahmood، Alen Gusa

1-13

PDF (الإنجليزية)
DOI: https://doi.org/10.25130/tjes.33.1.4

Analysis of Dynamics and Stability of an Eight-Dimensional Machining System with Cryptographic Applications

Mohanad F. Jwaid، Abdulsattar Abdullah Hamad، Jehan H. Hazaa، Firas Tarik Jasim، Rana B. Yaseen، Ngisty Amare

1-11

PDF (الإنجليزية)
DOI: https://doi.org/10.25130/tjes.33.1.32

Improving the Dynamic Performance of Hybrid Storage Systems Provided by PV Solar Panels

Mohammed Albaker Najm Abed، Ali Abdul Razzaq Altahir، Ahmed Abdulhadi Al-Moadhen

1-14

PDF (الإنجليزية)
DOI: https://doi.org/10.25130/tjes.33.1.22

Soft Computing-Based Model for the Ultimate Strength Prediction of Concrete-Filled Circular-Steel Columns

Suha Rasheed Abbas، Ammar N. Hanoon، Ali A. Abdulhameed، Mahir M. Hason، Haitham Jameel Abd

1-16

PDF (الإنجليزية)
DOI: https://doi.org/10.25130/tjes.33.1.25

Experimental Evaluation of Internal Finned Storage Tank of an Integrated Solar Water Heater with Corrugated Absorber Plate for Domestic Usage

Hussam S. Dheyab

1-12

PDF (الإنجليزية)
DOI: https://doi.org/10.25130/tjes.33.1.34

Use of ZSM-5 Photocatalyst for the Removal of Nickel and Cadmium Cations in Batch Experiment

Amal J. M. Al-Hamadani، Hayder Akram Al-Naseri، Ahmed A. Al-Mamoori، Nalan Turkoz Karakullukcu

1-14

PDF (الإنجليزية)
DOI: https://doi.org/10.25130/tjes.33.1.28

The Role of Some Agricultural Waste as Adsorbent in Removing Paracetamol from Simulated Wastewater

Zainab A. Naser، Lahieb Faisal M. A.

1-13

PDF (الإنجليزية)
DOI: https://doi.org/10.25130/tjes.33.1.33

Digital Modeling for Selecting the Optimal Combination of Building and Thermal Insulation Materials

Ihsan A. Hussein Al-Sarray، Maysoon A. Mansor، Leonid B. Zelentsov، Ahmed A. Naji

1-8

PDF (الإنجليزية)
DOI: https://doi.org/10.25130/tjes.33.1.21

Assessment of Mechanical Performance of Fiber Reinforced Geopolymer Concrete at Different Curing Conditions

Alaa Y. Hussein، Hammad M. Abd، Hasan M. Ahmed Albegmprli

1-13

PDF (الإنجليزية)
DOI: https://doi.org/10.25130/tjes.33.1.13

Evaluating the Performance and Emissions of a Diesel Engine Blended with Cottonseed

Mugdad Hamid Rajab، Maysoon Anwar Abdullah

1-10

PDF (الإنجليزية)
DOI: https://doi.org/10.25130/tjes.33.1.30

Review Article

Review of the Behavior of Geogrid-Reinforced Sand Soil Supported a Shallow Footing under Different Loadings

Ruqayah Al-Khafaji، Qassun S. Mohammed Shafiqu

1-23

PDF (الإنجليزية)
DOI: https://doi.org/10.25130/tjes.33.1.9

A Review on Lanthanum-Nickel-Based    Perovskite Catalysts for Catalytic Dry Reforming of Methane

Halah A. Ramadhan، Maha Al-Ali

1-42

PDF (الإنجليزية)
DOI: https://doi.org/10.25130/tjes.33.1.5

A Review Study of the Dynamic Load Effect on the Behavior of Shallow Footing Resting on Geogrid-Reinforced Soil

Naser Abed Hasen، Jawdat K. Abbas، Mohammed Mutnbak، Nimer Alselami

1-12

PDF (الإنجليزية)
DOI: https://doi.org/10.25130/tjes.33.1.1

Role of the Single Sheet Pile Beneath the Dams on Seepage Parameters Maintenance: Review

Omed Mohammed Pirot، Rashad Mohammed Hassan، Mohammed Nadhim Qadir، Mahmoud Abdelsalam Aref Obeid، Aurangzaib Abdul Samad Sanwal Khan

1-13

PDF (الإنجليزية)
DOI: https://doi.org/10.25130/tjes.33.1.31

Influence of Fiber Fillers on The Ballistic Properties of Epoxy and Polyester Resins: A Review

Mohanad L. Hamada، Saad R. Ahmed، Sanjeev Khanna، Mohammed Mutanbak

1-11

PDF (الإنجليزية)
DOI: https://doi.org/10.25130/tjes.33.1.11

Special Issue

Sustainable and Recycled Materials Additives for Tire Rubber Manufacturing: A Review

Hiba Abdali Jasim، Jumaa S. Chiad

1-17

PDF (الإنجليزية)
DOI: https://doi.org/10.25130/tjes.33.1.26