الهندسة الميكانيكية

ASJC Code: 2210

Field: Mechanical Engineering

Subject Area: Physical Sciences

73 فقرة/فقرات

  • Evaluation of Mechanical Properties of Al -7005/Red Mud and Phosphogypsum Hybrid Composites

    Waleed T. Rashid

    1-10

    DOI: https://doi.org/10.25130/tjes.32.3.16

  • English

    Ahmed Abbas، Ali Abbar Khleif

    1-9

    DOI: https://doi.org/10.25130/tjes.30.2.1

  • english

    Saif-Aldeen Ghafel، Nasri Salih M. Namer ، Abduljabar H. Ali

    21-30

    DOI: https://doi.org/10.25130/tjes.30.2.3

  • Energy And Exergy Assessment of North Refineries Company (NRC) Steam Cycle Based on Air Mass Flowrate of Main Condenser

    Waad A. Salih، Aadel A. Alkumait، Hameed J. Khalaf

    61-70

    DOI: https://doi.org/10.25130/tjes.28.3.05
  • Artcile 2 in No.1 Vol28

    Effects of Surface Preparation on the Corrosion Behavior of Mild Steel

    Wasiu Ayoola، Stephen Durowaye، Kenneth Andem، Olujide Oyerinde، Jesutofunmi Ojakoya

    16-25

    DOI: https://doi.org/10.25130/tjes.29.1.2

  • Effect of Yttrium Oxide on Mechanical and Physical Properties of Fe–10%Cu Composite

    Farouk M. Mahdi، Omar H. Mahmood

    67-72

    DOI: https://doi.org/10.25130/tjes.27.3.08

  • Effect of Steel shot peening Time on some Mechanical Properties of Friction stir Welds for Aluminum Alloy (2024 - T3)

    Adel Mahmoud Al-Bash ، Ghazwan Raad Shihab

    58-69

    DOI: https://doi.org/10.25130/tjes.27.4.07

  • Effect of Random Vibration of Rotor Supports with Nano Additives Lubricants

    Marwan Abdulrazzaq Salman، Mahmud R. Ismail

    1-15

    DOI: https://doi.org/10.25130/tjes.32.2.23

  • Effect of Phase Change Material Heated by Solar Energy on the Flow Assurance of Heavy Crude Oil

    Ghassan Al-Doori، Osama H. Al Naamani، Girma T. Chala

    1-12

    DOI: https://doi.org/10.25130/tjes.32.2.18

  • Effect of Milling Process Variables on the Size of Hematite Ore Particles

    Zahraa K. Baqer، Mohammed H. Hafiz، Firas F. Sayyid

    135-145

    DOI: https://doi.org/10.25130/tjes.31.4.14

  • Effect of Liquid/Solid Volume Ratio on Interface Formation and Mechanical Properties of Aluminum – Copper Bimetal by Squeeze Casting

    Ali H. Jassim، Najeeb S. Abtaan، Saad R. Ahmed

    124-134

    DOI: https://doi.org/10.25130/tjes.31.4.13

  • Effect of Different Compressor Speeds on the Energy and Exergy of an Automobile Air-Conditioner Using R134a in the Absence and Presence of a Liquid-Suction Heat Exchanger

    Ansam A. M. Alani، Wail S. Sarsam

    1-15

    DOI: https://doi.org/10.25130/tjes.32.1.13

  • EDM Electrode Design and Analysis to Enhance Process Performance

    Ahmed Mohammed Abbas، Ali Abbar Khleif

    145-152

    DOI: https://doi.org/10.25130/tjes.30.4.15

  • Design, Fabrication, and Experimental Analysis of a PV Panel for a Smart Sunflower System

    Hayder A. Alnaieli، Abdullateef A. Jadallah، Ali H. Numan

    113-126

    DOI: https://doi.org/10.25130/tjes.31.1.10

  • Design of an Axisymmetric Triangular Heatsink with Radial Arrangement: An Experimental Investigation of Natural Convection Heat Transfer

    Jamal Bakr Khaleel، Merdin Danışmaz، Tahseen Ahmad Tahseen، Mohammed I. A. Tahseen، Thamer Khalif Salem

    92-101

    DOI: https://doi.org/10.25130/tjes.31.4.9

  • Comparative Study on Creep, Hardness, and Density Properties of Materials for Transtibial Prosthetic Socket Fabrication

    Adel M. Bash، Tahseen T. Othman، Jawad K. Oleiwi

    1-13

    DOI: https://doi.org/10.25130/tjes.32.2.37

  • Closed Solar Air Heater System Integrated with PCM (RT42 and RT50) in a Thermal Storage-Finned Heat Exchanger Unit

    Hussam S. Dheyab، Manar Al-Jethelah، Thamir K. Ibrahim، Sirine Chtourou، Mounir Baccar

    27-37

    DOI: https://doi.org/10.25130/tjes.30.3.4

  • Characterizing the Mechanical Performance of Laser Welded Lap Transverse Fillet Joints of Thick AISI 316L Stainless Steel

    Raghad A. Al-Aloosi، Furat I. Hussein، Ahmed R. Alhamaoy، Muhannad A. Obeidi

    1-13

    DOI: https://doi.org/10.25130/tjes.32.3.17

  • An Experimental Investigation on Heat Transfer Enhancement in An Annulus with Rotating Outer Cylinder Using Nano Fluids

    Samer Mahmood Khalaf، Akeel Abdullah Mohammed، Qasim Jabbar Mohammed

    51-60

    DOI: https://doi.org/10.25130/tjes.29.2.7

  • A Theoretical Study to Incorporate Capillary Tubes Action and Evaporation Process as Green Energy Techniques for Water Lifting

    Tawfeeq W. Mohammed، Marwah N. Mohammed، Muhammad A. Eleiwi، Thamir K. Ibrahim

    159-166

    DOI: https://doi.org/10.25130/tjes.30.4.17

  • A Statistical Investigation and Prediction of the Effect of FDM Variables on Flexural Stress of PLA Prints

    Khalida K. Mansor، Alaa H. Shabeeb، Emad A. Hussein، Tahseen F. Abbas، Aqeel S. Bedan

    10-17

    DOI: https://doi.org/10.25130/tjes.31.3.2

  • A Comparison of Tensile and Flexural Properties of Jute Mat Epoxy-Based Composites Treated with Different Alkaline Solutions

    Aseel M. Abdullah

    1-9

    DOI: https://doi.org/10.25130/tjes.32.1.6

  • .

    Atif Ali Hasan، Mahmood H. Khaleel ، Kadhum Audaa Jehhef

    223-235

    DOI: https://doi.org/10.25130/tjes.31.1.19