Influence of Adding Different Fillers on Polyethylene Properties
الشريط الجانبي للمقالة
محتوى المقالة الرئيسي
الملخص
The aim of this study was focused on the improvement of pouring, mechanical and thermal properties of high density polyethylene using chemically treated kawaline as a filler which is composed of 10% carbamide and 90% kawaline. A composed had been made among the new filler (kawaline-carbamide), alumina and the pure kawaline in improving the latter properties of polyethylene. It was found that all the mentioned properties affect deeply by filler type and its content. Also it was found that the suitable filler is alumina and kawaline –carrbamide in less performance.
المقاييس
تفاصيل المقالة
هذا العمل مرخص بموجب Creative Commons Attribution 4.0 International License.
THIS IS AN OPEN ACCESS ARTICLE UNDER THE CC BY LICENSE http://creativecommons.org/licenses/by/4.0/
##plugins.generic.plaudit.displayName##
المراجع
Boyed, H. , Polymer, 26, P.323.1985. DOI: https://doi.org/10.1016/0032-3861(85)90192-2
Fleix, J.Gatenholm, P.Screiber and H.Proster, PolymerComposites, 14, P.449., 1993. DOI: https://doi.org/10.1002/pc.750140602
Gatenholm, P. Defleix, J.Kason, and C.Kubat , Topics of Polymer Science, Vol.7, ed salamone, J.C.Riffle, J.Plenium, New York.
Jarevela, P. Li, S., Jarvela, P. J. of Applied Polymer Science, 26, P.813, 1996.
Jourdan, C., Cavaille, J.Y Perrez, J. of Polymer Science, 26, P.813, 1989.
Mecrum G., Read B.E, Williams G., An elastic and Dielectric Effects in Polymer Solids, John Wily a Sons Ltd., London, p.377-387, 1967
Sanadi, A.R., Caulfield, D.F., Rawell, R.W., plastic Eng., P.27, 1994.
Y.G. Hsuan, T.J. McGrath, HDPE pipe: Recommended Materials Specifications and Design Requirements, Project 4-24, National Cooperative Highway Research Program (NCHRP), 1999.
Y.G. Hsuan, T.J. McGrath, HDPE pipe: Recommended Materials Specifications and Design Requirements, Project 4-24, National Cooperative Highway Research Program (NCHRP), 1999
Y.G. Hsuan, T.J. McGrath, HDPE pipe: Recommended Materials Specifications and Design Requirements, Project 4-24, National Cooperative Highway Research Program (NCHRP), 1999
Jensen R. Walcom, Preparation of Plastics Fillers, P.121, 1992.
Satterfield, C.N., Heterogeneous Catalysis in Practice, Chem. Eng. Series P. 192, 1980.
X.Lu, Z. Zhou, N. Brawn, Polymer Engineering and Science, Vol. 37, No.11, P.1896-1900, 1997. DOI: https://doi.org/10.1002/pen.11839
Alfred B., Searle and Rex, W. Grimshow, The Chemistry and Physics of Clay and other Ceramic Materials, Interscience publishing, Prd. Ed., New York, 1959.