Deashaltening and Hydrodesulphurization of Jumboor Vacuum Residue
الشريط الجانبي للمقالة
محتوى المقالة الرئيسي
الملخص
Vacuum residue of Jumboor crude oil above 773 K of specific gravity 1.105 and 6. I wt% sulfur , was treated with commercial pentane &hexane fractions for preparing deasphaltened oil (DAO) suitable for hydrodesulphurization process. Solvent deasphaltening was examined with mixing time 0.25 to 4 h and solvent to oil ratio 4 to 15 ml : 1g at different temperatures . The asphaltenes yield was decreased with increasing mixing time and increased with increasing solvent to oil ratio . Hexane deasphaltened oil hydrotreated on presulfided commercial cobalt-molybdenum alumina catalyst at specified operating conditions in a trickle bed reactor . The hydrotreating process applied at a range of temperatures varied from 623 to 698 K, liquid hourly space velocity (LHSV) from 0.7 to 2.2 h-1 ,H2/oil ratio about 300 liter/liter and hydrogen pressure was 4 Mpa . The results of hydrotreating process indicate high sulfur and metal removal with decreasing LHSV as well as high temperature applied . The kinetic of hydrodesulphurization and demetalization reactions followed 2nd and 1st order reactions respectively .
المقاييس
تفاصيل المقالة
هذا العمل مرخص بموجب Creative Commons Attribution 4.0 International License.
THIS IS AN OPEN ACCESS ARTICLE UNDER THE CC BY LICENSE http://creativecommons.org/licenses/by/4.0/
##plugins.generic.plaudit.displayName##
المراجع
لطيف حميد علي, عماد عبدالقادر الدبوني, “النفط المنشأ التركيب والتكنلوجيا”, العراق – جامعة الموصل 1986 .
Areff H. A.. IU.Sc. Thesis university of Trikrit, college of Engineering, Chern. Erg. Department (2001) .
Yen T. F., Wu H. D. and Chilingar v. G., Energy Sources, 7(3), 1984 DOI: https://doi.org/10.1080/00908318408908084
Jarallah, A. T., Msc. Thesis University of Tikrit, College of Engineering, Chem. Eng. Department, (2003) .
Yoshimura, Y. and Furimsky E., Fuel, vol. (65), 1388-1391 , 1986 ‘ DOI: https://doi.org/10.1016/0016-2361(86)90110-9
Barth E. J., “Asphalt Science & Technology”, 2nd Ed. 1968 ‘ DOI: https://doi.org/10.1021/es60014a006
Mohamntcd A. H. A. K. and HuSSain K. H., IJCPE, vol (2), No.(4), 12-14, 2001.
عبد الستار شاكر محمود, رشيد عبدالكريم و ايمان محمد حسين, “تقنية النفط الخام”, معهد التدريب النفطي, بغداد 1990
Speight J. G., “The Desulphurization of Heavy Oils and Residue”, (1981).
Crynes B. L., “Chemical Reaction as a Means of Separation Sulfur Removal”, Oil & Gas J.,79 Dec. 1,(1977).
Abbas A. s., M.Sc. Thesis university of Baghdad, college of Engineering, Chem. Eng. Department (1999).
Mustafa M. F., Hussain H., Rital L., Hisham l. and Suha S., Fuel Science & Technology international, 4(3),257, 1986
Smith E,. F. and Fleming C. E., Petrol. Refin., 361(7), 141, 1957 ‘
Corbett L. W., ACC Preper. Dev. Pet. Chem., 12(2), A83, 1967 ‘
Flinn R. A., Benther H. and Schmid B. K., Pet. Refin., 40(4), 139, 1961.
Ditman J. G., Hydrocarbon processing, 52(5), 110, 1913. DOI: https://doi.org/10.1007/BF01351614
Isoda T., Kusakabe K., Morooka Sh. and Mochida I.; Energy and fuels, 12,493-502, (1998) . DOI: https://doi.org/10.1021/ef970136r
Kim K. L. and Choi K.S., Int. Eng. Chem., 27, 340-356 (1987).
Gupta R. K., Mann R. S. and Gupta A. K., J. Appl. Chem. Biotechnol,23(10),641-648 (1978) .
- Mc culloch D. C., In Applied Industrial Catalysis, 1(69), (1983). DOI: https://doi.org/10.1016/S0033-3506(83)80032-8