انتاج خرسانة خفيفة الوزن باستخدام الفلين او عامل الرغوة

- Owens, P., Newman, J. and Choo B. S., "Advanced Concrete Technology Processes", Elsevier Ltd, 2003.

- Alshihri, M. M., Azmy, A. M. and El-Bisy, M. S., "Neural Networks for Predicting Compressive Strength of Structural Light Weight Concrete", Construct Building Material, Vol. 23, No. 6, pp. 2214-2219, 2009. DOI: https://doi.org/10.1016/j.conbuildmat.2008.12.003

- Babu, D. S., Babu K. G. and Wee T. H., "Effect of Polystyrene Aggregate Size on Strength and Moisture Migration Characteristics of Lightweight Concrete", Cement and Concrete Composite, Vol. 28, No. 6, pp. 520–527, 2006. DOI: https://doi.org/10.1016/j.cemconcomp.2006.02.018

- Chen, B. and Liu, J., "Contribution of Hybrid Fibers on the Properties of the High Strength Lightweight Concrete having Good Workability", Cement & Concrete Research, Vol. 35, No. 5, pp. 913–917, 2005. DOI: https://doi.org/10.1016/j.cemconres.2004.07.035

- Chia, K. S., Zhang M .H., "Water Permeability and Chloride Penetrability of High Strength Lightweight Aggregate Concrete", Cement and Concrete Research, Vol. 32, No. 4, pp. 639–645, 2002. DOI: https://doi.org/10.1016/S0008-8846(01)00738-4

- Neville, A. M. and Brooks, J. J., "Concrete Technology", Second edition, Prentice Hall, Pearson Education, pp. 339-340, 2010.

- Guo, Y. S., Kimura, K., Li, M. W., Ding, J. T. and Huang, M. J., "Properties of High Performance Lightweight Aggregate Concrete", International Symposium on Structural Lightweight Aggregate Concrete, No. 2, pp. 548-561, 2000.

- Mehta, P. K., and Monteiro, P. J. M., "Concrete: Microstructure, Properties and Materials", Third edition, New York: McGraw-Hill, 2006.

- Neville, A. M., "Properties of Concrete", Fourth and Final Edition, Prentice Hall, pp.711-713, 2000.

- ACI 213R-87, "Guide for Structural Lightweight Aggregate Concrete", Detroit, Michigan, 1999.

- Walraven, J., "Self-Compacting Concrete in the Netherlands", Proceedings of the First North American Conference on the Design and use of Self-consolidating Concrete, Evanston, USA، , pp. 355-360, 2002.

- Miled, K., Roy R. L., Sab, K. and Boulay, C., "Compressive Behavior of an Idealized EPS Lightweight Concrete: Size Effects and Failure Mode". Mechanics of Materials, Vol. 36, No. 11, pp. 1031–1046, 2004. DOI: https://doi.org/10.1016/j.mechmat.2003.08.004

- Fouad H. F., Lamond, J. F. and Pielert, J. H., "Significance of Tests and Properties of Concrete and Concrete-Making Materials, stp 169d , ASTM International, 2006.

- Ramamurthy, K., Kunhanandan Nambiar, E. K. and Ranjani, G. I. S., "A Classification of Studies on Properties of Foam Concrete", Cement and Concrete Composites, Vol. 31, pp. 388-396, 2009. DOI: https://doi.org/10.1016/j.cemconcomp.2009.04.006

- BYUN, K. J., SONG, H. W. and PARK, S. S., "Development of Structural Lightweight Foamed Concrete using Polymer Foam Agent. ICPIC-98, 1998.

- Short, A. and Kinniburgh, W., "Lightweight Concrete", 3rd Ed., Applied Science Publishers Ltd., London, pp. 1-14, 1978.

- Zulkarnain, F. and Ramli, M., "Performance of foamed concrete mix design with silica fume for general housingconstruction", European Journal of Technology and Advanced Engineering Research, No. 2, pp. 18-28, 2011.

- Aldridge, D., "Introduction to Foamed Concrete What, Why, and How?", In: Dhir RK, Newlands MD, McCarthy A, Editors. Thomas Telford, pp. 1-14, 2005.

- Kearsley EP. "The Use of Foamed Concrete for Affordable Development in Third World Countries", In: Dhir RK, McCarthy MJ, Editors. Appropriate Concrete Technology. London: E & FN Spon, pp. 233-243, 1996.

- Valore R C. "Cellular Concrete Part 2 Physical Properties", ACI J 50:817–36, 1954. DOI: https://doi.org/10.14359/11795

- IQS No: 5, 1984, "Characteristics of OPC", Central Agency for Standardization and Quality Control, Iraq.

- ASTM C 150, "Standard Specification for Portland Cement", Annual Book of ASTM, standards, Vol. 04.01, 2002.

- ASTM C 33, "Standard Specification for Concrete Aggregates", Annual Book of ASTM, Standards, Vol. 04.02, 2002.

- ASTM C 1437, "Standard Test Method for Flow of Hydraulic Cement Mortar", Annual Book of ASTM, Standards, Vol. 04.01, 2001.

- ASTM C 230, "Standard Specification for Flow Table for Use in Tests of Hydraulic Cement", Annual Book of ASTM, Standards, Vol. 04.01, 2003.

- ASTM C 109, "Standard Test Method for Compressive Strength of Hydraulic Cement Mortars (Using 2-in. or [50-mm] Cube Specimens)", Annual Book of ASTM, Standards, Vol. 04.01, 1999.

- ASTM C 348, "Standard Test Method for Flexural Strength of Hydraulic Cement Mortar", Annual Book of ASTM, Standards, Vol. 04.01, 2002.

- ASTM C 642, "Standard Test Method for Density, Absorption, and Voids in Hardened Concrete", Annual Book of ASTM, Standards, Vol. 04.02, 1997.

- Barnes, R. A., "Foamed Concrete: Application and Specification", Excellence in Concrete Construction through Innovation – Limbachiya & Kew (eds), Taylor & Francis Group, London, 2009. DOI: https://doi.org/10.1201/9780203883440.ch1

- Abolfazl, S., Kamal, R., Saber P., and Loghman, R., "The Effect of Water-Cement Ratio in Compressive and Abrasion Strength of the Nano Silica Concretes", World Applied Sciences Journal, Vol. 17, No. 4, pp. 540-545, 2012.

- Mydin, M. A. O. and Soleimanzadeh, S., "Effect of Polypropylene Fiber Content on Flexural Strength of Lightweight Foamed Concrete at Ambient and Elevated Temperatures", Advances in Applied Science Research, Vol. 3, No.5, pp. 2837-2846, 2012.