Influence of Particle Size Reduction on Combustion Properties and Thermal Behaviour of Agricultural Biomass
محتوى المقالة الرئيسي
الملخص
Particle size distribution is a critical determinant in the thermochemical conversion of lignocellulosic biomass. This research evaluates the impact of comminution on the calorific value and thermal kinetics of wheat straw, corn stalks, and hardwood chips (0.25–2.0 mm fractions). Experimental analysis demonstrates an inverse correlation between particle size and Higher Heating Value (HHV), with fine hardwood fractions achieving up to 20.03 MJ/kg—a relative increase of ~5.6%. Thermogravimetric analysis (TGA) identified a significant enhancement in thermal reactivity, evidenced by a 25–30°C shift in exothermic peaks toward lower temperatures. Additionally, the improved bulk density of finer fractions contributes to higher volumetric energy density, crucial for efficient storage and logistics. The study concludes that incorporating granulometric data into predictive models is essential for accuracy. Practically, these optimized properties facilitate more stable ignition and lower start-up loads in industrial grate and fluidized-bed boilers.
تفاصيل المقالة
القسم

هذا العمل مرخص بموجب Creative Commons Attribution 4.0 International License.
THIS IS AN OPEN ACCESS ARTICLE UNDER THE CC BY LICENSE http://creativecommons.org/licenses/by/4.0/
المراجع
He Y, Zhang S, Liu D, Xie X, Li B. Effect of Biomass Particle Size on Torrefaction Characteristics in a Fixed-Bed Reactor. Energies 2023; 16: 1104.
Klyuev RV, Martyushev NV, Kukartsev VV, Kukartsev VA, Brigida V. Analysis of Geological Information Toward Sustainable Performance of Geotechnical Systems. Mining Informational and Analytical Bulletin 2024; 5: 144–157.
Aguilar G, Muley PD, Henkel C, Boldor D. Effects of Biomass Particle Size on Yield and Composition of Pyrolysis Biooil Derived from Chinese Tallow Tree and Energy Cane in an Inductively Heated Reactor. AIMS Energy 2015; 3: 838–850.
Oliveira AR, Pereira H, Sen U. Influence of Chemical Composition on Heating Value of Biomass: A Review and Bibliometric Analysis. Energies 2023; 16: 4226.
Kukartsev V, Degtyareva K, Dalisova N, Mazurov A, Bezvorotnykh A. Optimization of Maintenance Work by Implementing an Automated Information System at a Repair Facility. E3S Web of Conferences 2024; 549: 09011.
Gholami R, Mahdaviari N, Moshiri S. A Study on Particle Size Effects on Biomass Briquettes. Journal of Engineering and Applied Sciences 2023; 17: 2137.
Degtyareva K, Tynchenko V, Panfilova T, Kukartseva S. Automated System for Accounting of Customers and Orders. Proceedings of the 23rd International Symposium INFOTEH-JAHORINA 2024.
Ding Y, Li H, Guo Z, Xu C. A Review of Mathematical Models for Predicting the Heating Value of Biomass. Renewable and Sustainable Energy Reviews 2012; 16: 350–363.
Al-Husban Y, Al-Ghriybah M, Gaeid KS, Takialddin AS, Handam A, Alkhazaleh AH. Optimization of the Residential Solar Energy Consumption Using the Taguchi Technique and Box-Behnken Design: A Case Study for Jordan. International Journal of Energy Conversion 2023; 11(1): 25–33.
Rahimi F, Bahrami H. Investigation of Effective Factors on Higher Heating Value of Biomass Fuels via Gaussian Process Regression. Energies 2021; 14: 600.
Sokolov AA, Fomenko VA, Aksenova MA, Malozyemov BV, Kerimzhanova MF. Development of a Methodology for Radon Pollution Studies Based on Algorithms Considering the Influence of Constant Mountain-Valley Winds. Applied Chemical Engineering 2024; 7(2): 1865.
Gaeid KS, Al Smadi T, Abubakar U. Double Control Strategy of PMSM Rotor Speed-Based Traction Drive Using Resolver. Results in Control and Optimization 2023; 13: 100301.
Panfilova T, Gladkov A, Tynchenko V, Kukartseva O, Kvesko M. Development and Optimization of Simulation Model of Decision Aid System Implementation. Proceedings of the 4th International Conference on Intelligent Technologies 2024; 1–6.
Kuzkin AY, Zadkov DA, Skeeba VY, Kukartsev VV, Tynchenko YA. Viscoplastic Properties of Chromium-Nickel Steel in Short-Term Creep Under Constant Stress. CIS Iron and Steel Review 2024; 27(1): 71–77.
Savchenko M, Tynchenko V. Unsupervised Production Machinery Data Labeling Method Based on Natural Language Processing. Proceedings of the International Russian Smart Industry Conference 2024; 416–421.
Lozano EM, Pedersen TH, Rosendahl L. Generic Approach for Modeling Liquefied Thermochemical Products and Biomass Heat of Formation. Energy Conversion and Management 2019; 199: 112025.
Nyakuma BB, Ahmad A, Johari A, Tuan Abdullah TA, Oladokun O. Torrefaction of Pelletized Oil Palm Empty Fruit Bundles. Applied Energy 2015; 155: 1025–1032.
Mahmood AT, Gaeid KS, Al Smadi TA. Direct Torque Control Space Vector Modulation for Induction Motor Driven by Matrix Converter. Tikrit Journal of Engineering Sciences 2024; 31(4): 58–69.
Klyuev RV. System Analysis of Calculation Methods for Power Supply Systems in Quarry Points. Sustainable Development of Mountain Territories 2024; 16(1): 302–310.
Morgoeva AD, Mandzhieva SS, Kirichkov MV, Sokolov AA. Machine Learning Models are Used to Assess the Effect of Coal Mining and Energy Enterprises on Ecosystems. Sustainable Development of Mountain Territories 2024; 16(3): 1130–1143.
Fastykovsky AR, Martyushev NV, Musatova AI, Karlina AI. Feasibility Demonstration of Normative Models for Sheet-Rolling Shop Productivity. Chernye Metally 2024; 2024(3): 63–68.
Dash L, Pattanayak BK, Laha SR, Pattnaik S, Mohanty B, Habboush AK, Al Smadi T. Energy Efficient Localization Technique Using Multilateration for Reduction of Spatially and Temporally Correlated Data in RFID System. Tikrit Journal of Engineering Sciences 2024; 31(1): 101–112.