تأثير محتوى الكرافيت وزمن الطحن على الصلادة، مقاومة الانضغاط، حجم البلى لمتراكبات النحاس – كرافيت المحضرة بواسطة ميتالورجيا المساحيق

Gökçe A, Fındık F, Kurt AO. Microstructural

examination and properties of premixed Al–Cu–Mg

powder metallurgy alloy. Materials Characterization

; 62: 730–735.

Groover MP. Fundamentals of modern

manufacturing materials, processes, and systems. 4th

ed. Wiley; 2010.

Yusoff Z, Jamaludin SB. The influence of particle

sizes and compaction pressure on surface hardness of

Aluminum composite fabricated via powder

metallurgy. Australian Journal of Basic and Applied

Sciences 2011; 5: 133-140. DOI: https://doi.org/10.3923/rjmsci.2011.133.140

Razzoqi RN, Mahmood LA, Ahmed MS, Fayyadh

SM. Influence of the chemical composition and

pressure of the compressing on some physical and

mechanical properties of ceramic matrix composite.

International Review of Mechanical Engineering

; 6: 332-338.

Zhan Y, Zhang G. Friction and wear behavior of

copper matrix composites reinforced with Sic and

graphite particles. Tribology Letters 2004; 17: 91-98. DOI: https://doi.org/10.1023/B:TRIL.0000017423.70725.1c

Kovacik J, Emmer S, Bielek J, Kelesi L. Effect of

composition on friction coefficient of Cu–Graphite

composites. Wear 2008; 265: 417-421. DOI: https://doi.org/10.1016/j.wear.2007.11.012

Futami T, Ohira M, Muto H, Sakai M. Indentation

contact behavior of Copper–Graphite particulate

composites: Correlation between the contact

parameters and the electrical resistivity. Carbon

; 46: 671-678.

Yang H, Luo R, Han S, Li M. Effect of the ratio of

graphite/pitch coke on the mechanical and

tribological properties of copper–Carbon composites.

Wear 2010; 268: 1337-1341. DOI: https://doi.org/10.1016/j.wear.2010.02.007

Ma W, Lu J. Effect of surface texture on transfer layer

formation and tribological behavior of copper–

graphite composite. Wear 2011; 270: 218-229. DOI: https://doi.org/10.1016/j.wear.2010.10.062

Ma W, Lu J, Wang B. Sliding friction and wear of

Cu–Graphite against 2024, AZ91D and Ti6Al4V at

different speeds. Wear 2009; 266: 1072-1081. DOI: https://doi.org/10.1016/j.wear.2009.01.051

Rajkumar K, Aravindan S. Tribological performance

of microwave sintered copper– TiC–graphite hybrid

composites. Tribology International 2011; 44: 347– DOI: https://doi.org/10.1016/j.triboint.2010.11.008

Jin Y, Hu M. Densification of graphite/copper

compound powders. IEEE 2011: 1131-1135.

Ma W, Lu J. Effect of sliding speed on surface

modification and tribological behavior of copper–

graphite composite. Tribology International 2011;

: 363–370.

Moustafa SF, El-Badry SA, Sanad AM, Kieback B.

Friction and wear of copper–graphite composites

made with Cu-coated and uncoated graphite powders.

Wear 2002; 253: 699–710. DOI: https://doi.org/10.1016/S0043-1648(02)00038-8

Ma XC, He GQ, He DH, Chen CS, Hu ZF. Sliding

wear behavior of copper-graphite composite material

for use in maglev transportation System. Wear 2008;

: 1087–1092.

Xiao J, Zhang L, Zhou K, Wang X. Microscratch

behavior of copper-graphite composites. Tribology

International 2013; 57: 38–45. DOI: https://doi.org/10.1016/j.triboint.2012.07.004

Rajkumar K, Kundu K, Aravindan S, Kulkarni M S.

Accelerated wear testing for evaluating the life

characteristics of copper-graphite tribological

composite. Materials and Design 2011; 32: 3029– DOI: https://doi.org/10.1016/j.matdes.2011.01.046

Rajkumar K, Aravindan S. Tribological behavior of microwave processed copper-nanographite composites. Tribology International 2013; 57: 282-296. DOI: https://doi.org/10.1016/j.triboint.2012.06.023

Samal CP. Microstructure and mechanical property study of cu-graphite metal matrix composite prepared by powder metallurgy route. M.Sc. thesis. Orissa, India: Department of Metallurgical and Materials Engineering, National Institute of Technology Rourkela; 2012.

Mohanty S. Synthesis and characterization of copper-graphite metal matrix composite by powder metallurgy route. M.Sc. thesis. Orissa, India: Department of Metallurgical and Materials Engineering, National Institute of Technology Rourkela; 2012.

Blau PJ. Friction iubrication and wear technology. ASM Handbook 18: 1992.

Bayer RG. Mechanical wear fundamentals and testing, Second edition: Marcel Dekker; 2004. DOI: https://doi.org/10.1201/9780203021798

Samal CP, Parihar JS, Chaira D. The effect of milling and sintering techniques on mechanical properties of Cu-graphite metal matrix composite prepared by powder metallurgy route. Journal of Alloys and Compounds 2013; 569: 95–101. DOI: https://doi.org/10.1016/j.jallcom.2013.03.122

Rajkumar K, Aravindan S. Microwave sintering of copper-graphite composites. Journal of Materials Processing Technology 2009; 209: 5601–5605. DOI: https://doi.org/10.1016/j.jmatprotec.2009.05.017

Wei X, Rui H, Jin-shan L, Yong-zhen Z, Heng-zhi F. Tribological behavior of CNT - Cu and Graphite-Cu composites with electric current. Transactions of the Nonferrous Metals Society of China 2012; 22: 78-84. DOI: https://doi.org/10.1016/S1003-6326(11)61143-6

Dewidar M, Jaber GTA, Bakrey M, Badry H. Effect of processing parameters and amount of additives on the mechanical properties and wear resistance of copper-based composite. International Journal of Mechanical and Mechatronics Engineering 2010; 10: 25-40.

Mutter MM. Copper-Graphite composite preparation and studying it's electrical mechanical and thermal properties. Ph.D. Thesis. Iraq: Al-Mustansiriyah University, College of Science;2010.

Mahdi FM, Razooqi RN, Irhayyim SS. Effect of graphite content and milling time on physical properties of Copper-Graphite composites prepared by powder metallurgy route. Australian Journal of Basic and Applied Sciences 2013; 7: 245-255.