Evaluating the (q-d) Axis Parameters of Three Phase Salient Pole Synchronous Machine
Article Sidebar
Main Article Content
Abstract
In order to perform any simulated work like using MATLAB Simulink for a salient pole
synchronous machine the direct-axis (d-axis) synchronous reactance xd and quadrature-axis
(q-axis) synchronous reactance xq ((q-d) axis) and other parameters must be calculated .In
this paper many tests has been made practically to calculate these parameters with the aid of
using slip test and sudden short circuit test using data acquisition card. These parameters
have been calculated successfully for the used salient pole machine.
Metrics
Article Details
This work is licensed under a Creative Commons Attribution 4.0 International License.
THIS IS AN OPEN ACCESS ARTICLE UNDER THE CC BY LICENSE http://creativecommons.org/licenses/by/4.0/
Plaudit
References
- BHAG S.GURU, (2004) “Electric
Machinery and Transformers”, seventh
edition, ISBN: 00-020034.
- Fitzgerald A. E., Charles Kingsley, Jr.
and Stephen D. Umans,( 2003)
“Electric Machinery”, Sixth ,Edition,
McGraw-Hill Companies, ,ISBN 0-07-
-4.
- IEEE Power Engineering Society,
(1995) “IEEE Guide: Test Procedures
for Synchronous Machines”, IEEE: Std
, ISBN 1-55937-71 0-0.
- IRVING L.KOSOW, (1972) “Electric
Machinery and Transformers”,
Prentice Hall, ISBN: 13-247205-8.
- Stephen J. Chapman, (2004) “Electric
Machinery Fundamentals”, BAE
SYSTEMS Australia, Fourth Edition,
McGraw-Hill, Inc...
- Theodore Wilde, (2006)“Electrical
Machines, Drives, and Power
Systems”, Sixth Edition, Pearson
Education International, ISBN 0-13-
-8.
- M. F. Al-Kababji and A. N. B. Al-
Sammak “Modeling & Simulation of
Synchronous Machine Controlled by
PID Control for the Reactive Power
Compensation” Electrical Engineering
Department University of Mosul 2002.