URN: http://nbn-resolving.iq/urn:nbn:iq:1025-tjes.v20i45

منشور: 2022-06-08

Articles

Effect of Austenizing and Tempering Heat Treatment Temperatures on the Fatigue Resistance of Carburized 16MnCr5 (ASTM 5117) Steel

Jamal Nayief Sultan

1-10

PDF (الإنجليزية)
DOI: https://doi.org/10.25130/tjes.20.4.01

A Contourlet-Based Image Denoising Technique with Coefficient Threshold Level Estimation

Akram A. Dawood

11-22

PDF (الإنجليزية)
DOI: https://doi.org/10.25130/tjes.20.4.02

Comparison of Water Quality Index at Intakes of Water Treatment Plants in Baghdad City

Eman Abdul –Rahman، Mohammad Fakhar Al-Deen Ahmad

23-34

PDF (الإنجليزية)
DOI: https://doi.org/10.25130/tjes.20.4.03

Elimination of Phenol Content in Baiji Refinery Waste Water Using Ash Supported Cupper

Afaf Jadaan Obaid Al Sanad

35-41

PDF (الإنجليزية)
DOI: https://doi.org/10.25130/tjes.20.4.04

Mechanical Properties of Fiberous Recycled Aggregate Concrete

Sarab A. Hameed

42-52

PDF (الإنجليزية)
DOI: https://doi.org/10.25130/tjes.20.4.05

Plastic Buckling of Metallic and Nonmetallic Thin-Walled Tubes under Static Axial Compression

Ayad Aied Mahuof Albadrany

53-59

PDF (الإنجليزية)
DOI: https://doi.org/10.25130/tjes.20.4.06

Evaluation of Future Performance of Northern Fatha Storage System in Hydropower Generation

Yousif Hashim Al-Aqily، Kamel Ali Abdul Muhsin

1-10

PDF (الإنجليزية)
DOI: https://doi.org/10.25130/tjes.20.4.07

The Study of Effect of Applied Pressure on Microstructure and Actual Density for A380 Alloy by Use Squeeze Casting Process

Farouq Mansor Mahdi، Najeb Salman Abtan، Saad Ramathan Ahmed

11-17

PDF (الإنجليزية)
DOI: https://doi.org/10.25130/tjes.20.4.08

The Effect of Magnetizing Irrigation Water on the Infiltration Rate in Soil

Anmar A. Al-Talib، Mohamed T. Mahmood، Omar M. Abdul Ghani

18-23

PDF (الإنجليزية)
DOI: https://doi.org/10.25130/tjes.20.4.09

Study of Using Gabion to Protect Downstream Slope of Stone Weirs

Ghanyah A. Hayawee، Hanaa A. Hayawee، Yusraa A. Hayawee

24-40

PDF (الإنجليزية)
DOI: https://doi.org/10.25130/tjes.20.4.10

Study the Effect of Rotational Speed and Pouring Temperature on the Wear Resistance and Hardness of Alloy (A380) Reinforced with Different Volume Fraction of Alumina Particles

Farouq Mansor Mahdi، Najeb Salman Abtan، Mohaned A. H. Al-Khazraji

41-48

PDF (الإنجليزية)
DOI: https://doi.org/10.25130/tjes.20.4.11