Influence of Stress Cycles under the Fatigue Endurance Limit on Strength and Life of Aluminum Nanocomposite
الشريط الجانبي للمقالة
محتوى المقالة الرئيسي
الملخص
Experimental testing revealed that adding ceramic nanoparticles of alumina Al2O3 to the aluminum alloy AA2017 by a casting route significantly enhanced the mechanical and fatigue properties. Understanding the behavior of materials under cyclic loads is necessary; engineers can ensure that structures and components perform reliably throughout their intended lifespan. This work explicitly focuses on the role of these nanoparticles in the fatigue behavior of the aluminum matrix (AA2017) and the resulting (AA2017 – 0.8 wt. %, Al2O3) nanocomposite. The test influences of the stress- number of cycles S – N curves showed that cyclic stress below the endurance limit for fatigue, followed by cyclic stress above the endurance limit, decreased the fatigue life and strength. Specifically, the fatigue life was decreased more than twice for the nanocomposite and about 4% for the base metal, while the fatigue strength was lowered by (140.8 to 137.8) MPa for the matrix and (155.5 to 142.4) MPa for the final product of (AA2017 – 0.8 wt. %, Al2O3).
المقاييس
تفاصيل المقالة
هذا العمل مرخص بموجب Creative Commons Attribution 4.0 International License.
THIS IS AN OPEN ACCESS ARTICLE UNDER THE CC BY LICENSE http://creativecommons.org/licenses/by/4.0/
##plugins.generic.plaudit.displayName##
المراجع
Asaad KH, Abdulwahab M AL-Mushehdany, Alalkawi HJM. Fatigue Life Estimation under High Temperature and Variable Loading of AA7001-T6 Using Shot Peening. Tikrit Journal of Engineering Science 2024; 31(2):168-174. DOI: https://doi.org/10.25130/tjes.31.2.16
Al-Helli AH, Hamza AK. Laser Treatment Influence on Estimated Fatigue Life of AA2017. IOP Conference Series: Materials Science and Engineering 2021; 1094(1):012165. DOI: https://doi.org/10.1088/1757-899X/1094/1/012165
Prajapati AU, Patel AJH, Patel KV, Bhatt PP, Varma SO. Effect of Al2O3 Nano-Particle on Mechanical Properties of Aluminum Based Alloy: A Review. IOSR Journal of Mechanical and Civil Engineering:2278-1684.
Yuan J. Study of Nano-treating Effects on High Strength Aluminum Alloys. University of California, Los Angeles 2021.
Mohamad S, Liza S, Yaakob Y. Strengthening of the Mechanical and Tribological Properties of Composite Oxide Film Formed on Aluminum Alloy with the Addition of Graphite. Surface and Coatings Technology 2020; 403:126435. DOI: https://doi.org/10.1016/j.surfcoat.2020.126435
Nayeeif AA, Alasadi AA, Alalkawi HJ. Effect of Nano Particle Size on Mechanical and Fatigue Behavior of TiO2 Particular-Reinforced Aluminum Alloy Composites. International Journal of Nanoelectronics & Materials 2023; 16(3). DOI: https://doi.org/10.58915/ijneam.v16i3.1319
Mayer H, Ede C, Allison J. Influence of Cyclic Loads Below Endurance Limit or Threshold Stress Intensity on Fatigue Damage in Cast Aluminium Alloy 319-T7. International Journal of Fatigue 2005; 27(2):129-141. DOI: https://doi.org/10.1016/j.ijfatigue.2004.06.004
Tolephih MH, Mahmood IA, Abdullah ZW. Strain-Life of Shot Peening AA2017-T4. J. King Abdulaziz Univ. Eng. Sci 2014; 25(2):25-24. DOI: https://doi.org/10.4197/Eng.25-2.4
Alalkawi H, Elkhawad A, Khenyab AY. Laser Surface Coating Fatigue Interaction of 2017A-T3 (Aluminum Alloy). The Iraqi Journal for Mechanical and Material Engineering 2017; 17(1).
Djili A, Bezzazi B, Haboussi M, Zioui N. Assessment of Friction Stir Welding Joints of AA2017-T4 Aluminum by Disc Pressure Mechanical Tests. Journal of Applied Engineering Science 2023; 21(2):577-586. DOI: https://doi.org/10.5937/jaes0-41037
ASM Aerospace Specifications Metals Inc. 2000 Series Aluminum Alloys. 2000.
ASTM International. Designation: E8/E8M-09. 2009.
Abdulridha FH. The Effect of Nanomaterial (Al2O3) on Fatigue Behavior for Aluminum Alloy under Low Temperature. Thesis submitted to the Department of Electromechanical Engineering, University of Technology 2017.
Hemanth J. Fracture Behavior of Cryogenically Solidified Aluminum Alloy Reinforced with Nano-ZrO2 Metal Matrix Composites (CNMMCs). JCEM 2011; 2(8):110-121. DOI: https://doi.org/10.1016/j.msea.2008.11.039
Bharath V, Nagaral M, Auradi V. Preparation, Characterization and Mechanical Properties of Al2O3 Reinforced 6061 Al Particulate MMCs. International Journal of Engineering Research & Technology 2012; 1(6):1-6.
AL-Mushehdany A, Yahya MM, Ibrahim EK, Alalkawi HJM. Nano Reinforcement Technique as a Tool for Enhancement the Mechanical and Fatigue Properties. Curved and Layered Structures 2022; 9(1):345-351. DOI: https://doi.org/10.1515/cls-2022-0026
Al-Salihi HA, Mahmood AA, Alalkawi HJ. Mechanical and Wear Behavior of AA7075 Aluminum Matrix Composites Reinforced by Al2O3 Nanoparticles. Nanocomposites 2019; 5(3):67-73. DOI: https://doi.org/10.1080/20550324.2019.1637576
Jaber MH, Aziz GA, Mohammed AJ, AL-AIKawi HJ. Electrical Conductivity, Magnetic and Fatigue Properties of Aluminum Matrix Composites Reinforced with Nano-Titanium Dioxide (TiO2). Nanocomposites 2020; 6(2):47-55. DOI: https://doi.org/10.1080/20550324.2020.1769976
Miller K, Mohamed H, Los Rios ED. Fatigue Damage Accumulation Above and Below the Fatigue Limit. Mechanical Engineering Publications, The Behaviour of Short Fatigue Cracks 1986:491-511.
Xi L, Songlin Z. Strengthening and Damaging Under Low-Amplitude Loads Below the Fatigue Limit. International Journal of Fatigue 2009; 31(2):341-345. DOI: https://doi.org/10.1016/j.ijfatigue.2008.08.004