Study the Effects of Prestrains in Uniaxial Tension on the Forming Limit Diagram of Aluminum Alloy Sheets(2024 T3)
Article Sidebar
Main Article Content
Abstract
The strain path for sheet metal may be changed during forming , this may be affect the forming limit curve (FLC) . In this work the FLC before and after prestraining was determined for aluminum alloy (2024 T3) to study the effect of this type of prestraining and in different values on the FLC. This alloy was chosen because it is used widely , specially in aircraft structures .It was shown that the using of uniaxial tension prestrain affects the FLC . The major strain in right side is increased with the increasing in the prestrain , while in the left side the effect is small.
Metrics
Article Details
This work is licensed under a Creative Commons Attribution 4.0 International License.
THIS IS AN OPEN ACCESS ARTICLE UNDER THE CC BY LICENSE http://creativecommons.org/licenses/by/4.0/
Plaudit
References
Groover.M.P.,” Fundamentals of Modern Manufacturing”, John Wily & Sons, 2002.
Dieter,G.E., Mechanical Metallurgy, Second Edition ,McGraw-Hill Kogakusha,1981.
Campos. H. B., Butuc M. C., Gr´acio J.J., Rocha J.E. , Duarte J.M. F. Theorical and experimental determination of the forming limit diagram for the AISI 304 stainless steel . Journal of Materials Processing Technology 179 ,56 60(2006). DOI: https://doi.org/10.1016/j.jmatprotec.2006.03.065
Graf.A&Hosford.W.F, Effect of changing paths on forming limit diagrams of Al 2008-T4,Met. Trans.24A,2503 (1993). DOI: https://doi.org/10.1007/BF02646529
Graf.A&Hosford.W.F, The influence of strain path changes on forming limit diagrams of Al 6111T4. Int.J.Mech. Vol. 36, No. 10, pp. 897-910, 1994. DOI: https://doi.org/10.1016/0020-7403(94)90053-1
Keeler S.P. and Backofen W.A., Plastic Instability and Fracture in Sheets Stretched Over Rigid Punches, Transactions of The ASM,Vol.56,25-48 (1963) .
Keeler.S.P, Circular Grid System , A Valuable Aid For Evaluating Sheet Metal Formability, Society of Automotive Engineers Technical Paper ,no.680093 (1968). DOI: https://doi.org/10.4271/680092
Goodwin, G.M., Application of Strain Analysis to Sheet Metal Forming Problems in the Press Shop, Society of Automotive Engineers, technical paper no. 680093 (1968) . DOI: https://doi.org/10.4271/680093
Aghaie-Khafri.M , Mahmudib.R, The effect of preheating on the formability of an Al Fe Si alloy sheet . Journal of Materials Processing Technology 169, 38 43 (2005). DOI: https://doi.org/10.1016/j.jmatprotec.2005.02.257
Kim.K.J.,et al,” Formability of AA5182j/polypropylene/AA5182,sandwi sheets”,J.Mat.Proc.Tech.139,1-7(2003). DOI: https://doi.org/10.1016/S0924-0136(03)00173-0
Muschenborn W.& Sonee H.M., Influence of the strain path on the forming limits of sheet metal. Arch. Eisenhutt. 46,597(1975).
Laukois.J.V.&Ghosh,A.K., anisotropic strain localization in tensile prestrained sheet steel. Met. Trans. 9A, 1849(1978).
Ranta-Escola A.J., Effect of loading path on stress -strain relationships of steel sheet and brass.Mater. Technol. 45, (1980). DOI: https://doi.org/10.1179/030716980803286928
Schmittj Raphael-E.Raush J.H. & Marten P., Plastic instability of Prestrained material, Computational Methods for predicting Materials Processing Defects, p.309. Elsevier, Amsterdam(1987). DOI: https://doi.org/10.1016/B978-0-444-42859-2.50034-X
Marciniak, Z. ; Duncan, J.L., Mechanics of Sheet Metal Forming , Butter worth-Heinemann ,2002.
Hosford.W.F.,Caddell.R.M., Metal Forming Mechanics and Metallurgy.Hall, Inc., Englewood Cliffs, New Jersey,1983.
Hitchcock,Manthey,LLC.http://www.s urfacestrain.com , USA.
Junior.E.H ,www.pdffactory.com .
Chow CL, Jie M. Forming limits of Al 6022 sheets with material damage consideration , theory and experimental validation. Int.J.Mech Sci.46,99- 122(2005). DOI: https://doi.org/10.1016/j.ijmecsci.2004.02.003
Wagoner.R.H., Chan.K.S, Keeler.S.P, Forming limit Diagrams: Concepts , Methods ,and Applications , Minerals, Metals and Materials Society 420 Commonwealth Drive , Warrendale , Pennsylvania 15086,(412)776-9024,1989.
Hecker, S.S., Simple Technique for Determining Forming Limit Curves,Sheet Metal Industries, pp. 671-676, 1972.
Narayanasamy.R , C. S.Narayanan , Evaluation of limiting strains and strain distribution for interstitial free steel sheets while forming under different strain conditions , Materials and Design 28,1555 1576 (2007). DOI: https://doi.org/10.1016/j.matdes.2006.02.019
Date.P.P,Padmanabhan.K.A, Deforma tion behavior of sheets of three aerospace Ai-alloys , J.Mat.Proc.Tech.139, 68- 77(2001). DOI: https://doi.org/10.1016/S0924-0136(01)00547-7
Gupta.A.K, Kumar.D.R, Formability of galvanized interstitial-free steel sheets Journal of Materials Processing Technology 172, 225 237(2006). DOI: https://doi.org/10.1016/j.jmatprotec.2005.10.016