Experimental Study of the Effect of Octane Number on the Performance Coefficients of the Two Strokes Spark Ignition Engine

Main Article Content

Ra’ed R. Jasim

Abstract

The experiments had been carried out using two stroke, single cylinder type (TD113), with compression ratio of (7.3:1) Coupled to hydraulic dynamometer type (TD115). The results showed that there is enhancement of the engine performance with increasing octane number. This appears clearly when comparing the results of performance with fuel of 75 and 95 octane number. The torque increases 10% at speed of 2750 RPM. The break power also increases 18% when the octane number changed from 75 to 95 at 3000 RPM of engine speed. The same change in octane number will increase the thermal efficiency by 9% at 2300 RPM of engine speed. The break specific fuel consumption decreases at the same ratio of thermal efficiency 9% but at 2400 RPM. The less fuel consumption happens at 2400 RPM for octane number 95.

Metrics

Metrics Loading ...

Article Details

Section
Articles

Plaudit

References

Bruce Hamilton: “Automotive Gasoline”, 2005.

جابر شنشول جمالي “تكنولوجيا الوقود ” مديرية النشر الموصل 1981.

3.Tomas Lid Holm:”Knock Prediction With Reduced Reaction Analysis”: Master thesis linkÖpings universitet, 2003.

محمد حسن عبود “دراسة عملية لتاثير العدد الاوكتاني على اداء محركات الاشعال بالشرارة ” مجلة تكريت للعلوم الهندسية مجلد 13 عدد2 2006.

Willard W. Pulkrabek :”Eng. Fundamentals Of The Internal Combustion Engine ” First Edition 1997.

Didacta Italia-Strada Del Cascinotto, 139/30-10156 Torin Italy [http: //www .didacta.it.

Similar Articles

You may also start an advanced similarity search for this article.