Study the Stability of a Wastewater Treatment Unit using LABVIEW
Article Sidebar
Main Article Content
Abstract
This study was devoted to limit the stability conditions of the wastewater treatment unit. LABVIEW was a powerful and versatile graphical programming language in automation control and date acquisition of the system. The on-line show that accurate and stable control responses were obtained in the present work. The actual phase plane proved to a better technique to limit the regions of the non-linear system stability compared to other theoretical techniques. Limit cycle did not appear in the present system.
Metrics
Article Details
This work is licensed under a Creative Commons Attribution 4.0 International License.
THIS IS AN OPEN ACCESS ARTICLE UNDER THE CC BY LICENSE http://creativecommons.org/licenses/by/4.0/
Plaudit
References
Sultan, I. A., “Treating Metal Finishing Wastewater “, A Quachem Inc., Environmental Technology, March, April, (1998).
Chaudhuri, V. R., “Comparative Study of pH in an Acidic Effluent Neutralization Process”, IE-Journal-CH-Vol. 86, pp.64-72, March, (2006).
Canete, J. F., Perez, S.G. and Orozco, P.d, ”Artificial Neural Networks for Identification And control of a Lab-scale Distillation column Using LABVIEW”, Processing of Would Academy of Science, Engineering And Technology, Vol.30, pp.681-686, July, (2008).
Ogata,K., “Modern Control Engineering’, 7th edition, Prentiss-Hall, New Jersey, pp.563, (1982).
Pollard, Process Control, McGraw-Hill, 2nd edition, pp.134, (1981).
Emerson, “Basic of pH Control “, Application Data Sheet, ADS 43-001, rev. August, (2004).
Environmental Protection Agency (EPA), Wastewater Treatment Technologies, Technical Report, U.S.A, pp.1-30, (2005).
Chau, P.C., “Chemical Process Control: A first Course with MATLAB’ Cambridge University Press, 1st edition, chapter 6, (2001). DOI: https://doi.org/10.1017/CBO9780511813665
Stephanopouls, G. “Chemical Process Control an Introduction to Theory and Practice”, Prentiss-Hall, 2nd edition, N.J., chapter 5, (1984).