vol24no2pa8

References

[1] صالح, ياسين علي، تأثير تغيير مصادر الركام والسمنت على مقامة الانضغاط للخلطات الخرسانية, مجلة هندسة الرافدين, العدد 14, مجلد 18; 2010.
[2] الخلف, مؤيد نوري و يوسف، هناء عبد, تكنولوجيا الخرسانة, مطبعة الجامعة التكنولوجية; 1984.
[3] عبدالله, زهير حسن، تأثير التفاوتات التصميمية على مقدرة العملية الإنتاجية, مجلة التقني, العدد 12, مجلد 4; 2011.
[4] عباس, جودت كاظم وصالح، ياسين علي, تأثير المواد المكونة للخلطات الخرسانية المستخدمة في مشاريع اعمار محافظة صلاح الدين على مقاومة الانضغاط, مجلة تكريت للعلوم الهندسية, العدد 2, مجلد 13; 2006.

Tikrit Journal of Engineering Sciences (2017) 24(2) 68-76

Measurement and Improvement the Quality of the Compressive Strength of Product Concrete

Zuher Hasan Abdulla Thamer Khalaf Salim
Al-Furat Al-Awsat Technical University, Technical Institute, Babylon, Iraq Mechanical Eng. Dept., Tikrit University, Iraq.

Abstract

The research dealt with studying path technology to manufacture of concrete cubes according to specification design of Iraq to the degree of concrete C20 No. 52 of 1984, and in which sample was cubic shape and the dimensions (150 × 150 × 150) mm for each dimensions and the proportion of mixing of the concrete is (1:2:4) using in the casting floor. For concrete resistance required that achieve the degree of confidence of 100%, were examined compressive strength 40 samples of concrete cubes of age 28 days in the Labs section of Civil Department – Technical Institute of Babylon, all made from the same mixing concrete. Where, these samples classified within the acceptable tests were adopted in the implementation of investment projects in the construction sector. The research aims first, to measure the compressive strength of concrete cubes because the decrease or increase the compressive strength from specification design contributes to the failure of investment projects in the construction sector therefore, test was classified units that produced within damaged units. Second, to study an improvement the quality of compressive strength of concrete cubes. Results show that the proportion of damaged cubes are 0.00685, compressive strength was achieve confidence level 99.5% and producing of concrete cubes within the acceptable level of quality (3 Sigma). The quality of compressive strength was improved to good level use advanced sigma levels

Download Full-Text PDF

Keywords: Compressive strength, Concrete, Quality, Sigma.

How to cite

TJES: Abdulla ZH, Salim TK.  Measurement and Improvement the Quality of the Compressive Strength of Product Concrete. Tikrit Journal of Engineering Sciences 2017; 24(2): 68-76.
APA: Abdulla, Z. H., Salim, T. K. (2017). Measurement and Improvement the Quality of the Compressive Strength of Product Concrete. Tikrit Journal of Engineering Sciences, 24(2), 68-76.